// // Leave a Comment

How To Uninstall And Reinstall Pendrive Driver

Uninstall And Rreinstall Pen drive Driver

pendriveYou might have encountered a situation where your pen drive stops working properly on your computer or laptops while it work perfectly on other’s computer, if this is happening with you or in your friends computer then it is due to bad or corrupted pen drive software installed in computer. This problem associated with pen drive occurs more on unsecured computer, like computer having expired antivirus or having no antivirus installed. . The main reason why pen drive software gets corrupted is due to viruses, malwares or any other security threats etc. Sometimes sudden unplugging of pen drive can also results in pen drive software corruption and there are many other minor reason which results in pen drive installed software corruption but here we will be not going to discuss all those factor here because it takes one whole lecture to discuss those factors . However soon we will write article on this note in next upcoming post.

Here in this article we will be helping you to learn how you can install fresh pen drive software in your computer/laptop. But before teaching how to install pendrive driver on your computer we need to learn how to uninstall corrupted pen drive software or driver, let’s get started in our step by step guide.

Step by step guide on how to uninstall corrupted pen drive software

To uninstall pen drive driver from a computer first and foremost step is to unplug pen drive from the computer and now restart or close all the open program and if you had restarted your computer then wait for couple of minute so that window loads up completely. Now Re-plug pen drive and follow the below given steps.

Step 1: Open control panel of your computer

Go to start, Look for the control panel and click on it.

Step 2: Select and click “Device manager”

Under control panel, from the list of control panel items, Choose “Device manager”

Step 3: Go to Universal serial bus controller.

Now, from the device manager window, Look for the Universal serial bus controller and click on it once.

Step 4: Plug-in pen driver.

Plug-in pen drive to your computer, Usb mass storage device will pop up under universal serial bus controller. If this option won’t come up then click on “Scan for the hardware change”.

Step 5: Uninstall “Usb mass storage device” Driver

Now, Right click on “usb mass storage device”, click uninstall. Confirm “Uninstall mass storage device” by pressing ok. Remove pen drive from computer

Step 6: Install pen drive drivers.

Make sure to remove pen drive after uninstalling Drivers, restart your pc or laptop. Wait for the program and OS to load successfully. Now, plug in pen drive to computer usb port .If your pen drive hardware is in good condition your pen drive software will install pen drive software automatically.

How to install pen drive driver on a computer

Installing pen drive in a computer is much more easy than any other software installation only thing you need to do is to first uninstall corrupted pen drive from computer and follow below give step by step guide

Step 1: Restart computer

Unplug pen drive and restart your computer.

Step 2: Plug in pen drive to the computer.

Once your window loads up completely then plug your pen drive in your computer

Step3: Wait for pen drive to automatically install pen drive drivers

Pen drive will automatically install pen drive driver on your computer.

Please share this post and like us on social networking account to keep in touch with our next upcoming articles also be sure to subscribe our YouTube channel. www.youtube.com/user/shoutingblogger


Post a Comment

Found Spell Error , Need to add more content use this form to Suggest Edit